PVC Marble Sheet for Wall is a decorative wall panel that mimics the look of real marble, with a protective layer, and costs 80% less than real marble. It is also easy to install due to its lightweight, and it requires easy cleaning using water and soap, not to mention the waterproof and stain-resistant features.
The PVC wallpaper could be used in bathrooms, kitchens, living rooms, and entry halls, but it is not the best choice for outdoor areas, with some consideration of heat resistance.
Let’s take it Step-by-Step together to know how to install PVC Marble Wallpaper:
Why choose PVC marble sheet for wall?
We prefer to choose PVC marble sheets based on some features that make them an ideal alternative to real marble. Let’s share it with you:
- Affordable cost can transform your property style into an aesthetic appearance and modern touches, taking the same look as the real marble but at an effective price.
- It is durable, which means it has a high resistance to scratches, stains, as well as impacts. That means it also fits the wet areas like
- laundry room, bathroom, and kitchens -prefer not to put the PVC sheets near the stove.
- Easy to install due to its lightweight, basic tools needed, and reduced labor costs, and shipping costs.
- The PVC marble sheets require low maintenance, with no need for sealing or polishing, but need a simple process to clean: water, soap, and a damp cloth.
- This material can suit all ideas you have: wall cladding, backsplashes, furniture, and other interior designs. -not recommended in exterior designs-.
- PVC marble sheet for wall are available in a variety of colors, patterns, and designs.
Tools and Materials Required to Install PVC Marble
Here are the tools and materials required to install pvc marble sheet for wall. If you think there are additional tools or materials that should be considered in this process, please share your thoughts with us!
Materials
The material we need to install the PVC marble panels is
- Strong construction adhesive
- Silicone sealant (optional, for edges and joints)
- Clean cloths or sponges
- PVC marble wall panels (full-size, 48 in. x 108 in.)
- Construction adhesive (strong, fast-curing)
- Clean cloth or sponge
- Optional: painter’s tape, silicone sealant for edges
- Primer: If recommended for better adhesion.
- Paint or touch-up kit: To finish edges or cover any imperfections.
- Edge trim or molding: To give a polished look to the edges of the panels.
Tools
The tools we need to use to install the PVC marble sheet for wall
- Measuring tape
- Utility knife or circular saw
- Straight edge or ruler
- level
- Caulk gun
- Spatula or notched trowel (for spreading adhesive)
- Rubber hammer (optional, for pressing panels)
- Sandpaper (for smoothing edges, optional)
- Utility knife or circular saw
- Measuring tape and level
- Straight edge or ruler
- Safety glasses: To protect your eyes while cutting and handling materials.
- Dust mask: To avoid inhaling dust from cutting panels.
- Jigsaw: For more intricate cuts around outlets or corners.
- Screwdriver: If you need to secure panels with screws.
- Trowel: For spreading adhesive evenly.
Step-by-Step PVC Marble Wallpaper Installation Process
1. Preparing the Wall Surface
Cleaning the surface is the first step of any process; in PVC marble sheet for wall installation, it is a must. Remove dust and dirt, then wipe it and wait till it dries. Do you think this step is done? Of course not; the PVC panel requires filling any cracks or holes in the wall to receive a smooth PVC marble appearance.
2. Measure so we can plan
As mentioned before, the tools and materials we need to measure and plan the PVC install, first measure your wall using the measuring tape, and note down the height and width.
Then, calculate how many panels you will need based on the dimensions. Now the step is to plan the starting point, then use the level and a pencil to draw straight lines on the wall to ensure your rows are applied straight.
3. Let’s cut the panels
After measuring the wall and gathering the dimensions, let’s measure the panel to the exact size needed. Use a sharp utility knife to cut the panel. Don’t forget to prioritize your safety by wearing gloves, safety glasses, and a dust mask if needed.
Note: Before applying the PVC marble sheet for wall, do a simple test to ensure the fit of the pieces.
4. Apply the panels
Start applying the panels by peeling off the back – you’ll find it in a small portion of the adhesive side of the panel. Then align the edge of the board with your instructions on the wall and press it against the wall (it’s best to start from the center outward for a better result). Then use a rubber mop or similar tool to push air bubbles toward the edges while placing the board (don’t miss this step).
Continue by peeling off the back of the next panel and smoothing it as you go. If air bubbles persist after use, prick with a pin or needle and use the mop again to smooth the area. For a smooth finish.
Where Can You Install PVC Marble Sheets?
1- Bathroom Walls
PVC marble sheet for wall can be used on bathroom walls, either behind the sink or on the door wall.
2- Kitchen backsplashes
In the kitchen, they can be placed behind the sink, in the space between storage units, or on the door. Be careful not to place them near the oven to avoid damage and the need for replacement after a short period.
3- Laundry Rooms
PVC Marble Sheets are very suitable for use in laundry rooms, helping to create a quieter and more harmonious environment.
4- Living Rooms
PVC Marble Sheets can be placed behind the TV to add a unique aesthetic touch, behind the main sofa, or on an empty wall to enhance the sense of space in the room.
5- Bedrooms
They can be used behind the bed or the dressing table. However, it’s preferable not to use them behind the closet, as it would be a waste of money since the panels wouldn’t be visible.
6- Offices and Commercial Spaces
There are beautiful and unique PVC marble sheet for wall designs that are perfect for placement in offices and commercial spaces, transforming the overall look.
7- Doors
Did you know that PVC Marble Sheets can also be applied to doors? This is a cost-effective option compared to buying new doors. If you want to change the decor and appearance of your home, adding these panels to your doors can make them look like real marble.
Maintenance Tips After PVC Installation
- After installing pvc marble sheet for wall, let the glue dry for about 24 hours.
- Fill the pipes with water and check for leaks.
- Wipe regularly with a soft, damp cloth.
- Avoid harsh chemicals or abrasive scrubbers.
- Consider using a UV-resistant -UV marble sheet design- (protective coating) to prevent color fading.
- Do you know that a non-abrasive PVC polish can restore the panels’ shine?
Common PVC Marble Installation Mistakes to Avoid
- Install the PVC marble sheet for wall without cleaning the wall, which will cause it to stick poorly to the wall.
- Using the wrong adhesive or putting less or more than needed.
- Exposure to sunlight or high-temperature areas.
- Not planning the measurements and cuts.
FAQS about PVC Marble Wallpaper
How to install marble PVC panels?
- Clean the wall, and ensure there are no holes.
- Plan the measures.
- Cut the panels.
- Apply the panels using the right tools.
- Peel off the protective film from the surfaces.
Does marble wallpaper need gum?
No, the marble wallpaper doesn’t need gum because it has a self-adhesive behind it. But there is some wallpaper that doesn’t provide a self-adhesive; you must ask before buying the PVC panels.
Can we use PVC marble sheets in the bathroom?
Yes, you can use PVC marble sheets in the bathroom because this material is waterproof and moisture-resistant.
What is the difference between UV marble and PVC marble?
The difference between UV marble and PVC marble is the protective coating (UV) in the UV marble sheet for the wall that offers durability, scratch resistance, and a glossy appearance.
